Forgot your BIOS password? Here's how to reset it

If you set a BIOS password at some point and now you need to enter it but don't remember it, you should know that there is no "password recovery" system like the ones in the email. Here are the easiest ways to remove your BIOS password quickly.

Every computer has a BIOS (or UEFI) and you can set a password to prevent you from editing its settings. But since you don't log in every day, it's possible that you'll forget it over time. Then you won't have access to the fixes you need. Luckily, there is a way to overcome this problem.

I want to know, льку единственным безошибочным является последний, заключающийся в перепрошиBIвке OS, что, в свою очередь, делает его самым опасным из всех, поскольку, если он пойдет не так, мы можем испортить наш компьютер. BIOS - BIOS ть его и вернуть контроль над компьютером. Зачем BIOS? ого заключается в том, что мы используем компьютер только для себя и редко заходим в BIOS. существовании такой возможности и даже не представляют, что это такое. ии, компьютером пользуются несколько человек или он находится в рабочей. В таких ситуациях рекомендуется защитить доступ к BIOS. пароль. мы.

In the case of a laptop, it is especially important to enter a password when accessing the BIOS. This prevents the release of boot options and security measures. It is also a protection in the unlikely event that it is stolen. Note that resetting your laptop password is always a little complicated.

If you enter a password in the BIOS, anyone will not be able to access or change the settings. Without a password, you cannot move the menu or change at startup. This does not cause accidental access or malicious access.

As mentioned above, we do not log in to the BIOS every day. In fact, when you get your computer for the first time, you often log in to set up a single way, and then do not log in. For this reason, it is common to forget your password. However, you need to know that there is a mechanism to delete your password in case you forget your password.

How to enter the BIOS without a password

If you forget the BIOS password and need to urgently change the BIOS setting, the following methods are useful: The first thing to do is to attack the famous CMOS battery of the system. The CMOS battery is a button battery that uses the data stored in this part of the computer by supplying power over many years.

Remove the CMOS battery

This is the oldest way, and is valid for many motherboards that are still on the market. All motherboards are equipped with a CMOS battery and are used to keep the system on time even if the power is cut. When this battery is removed, the BIOS password is mostly deleted.

To do this, it is important to turn off the computer and remove the power cable. After that, for safety, wait for 5-10 minutes until all parts are discharged. Computers require only a small amount of power, as static electricity can be continued to continue. Have you ever seen that the red lamp does not disappear immediately by pulling out the TV outlet? And this also happens, which requires much more power than computer standby components.

Access the battery and remove the battery using a driver or toothpick. You need to wait 20 to 30 minutes on a computer with the battery removed. After this time, return the battery, connect the cable and turn on the power. The BIOS should no longer request a password. Not only that, all set parameters return to the state of the factory.

Clear CMOS

This is nothing but reset the BIOS to the state at the time of shipment (be careful as all the configured contents are lost). To do this, recent motherboards already have a button called Clear CMOS, and some motherboards are on the back connector panel, so you don't have to open the tower and access the buttons as shown in the photo below. 。

Continue the system with the computer is off, pressed this button for 10 seconds (or the time listed in the motherboard manual) and launch the system. That's it. This is the same system as the previous one, but there is no need to open the computer and remove the battery. However, there is no risk of modifying the PC components that may be damaged on the way in a more controlled method. For example, a slot that contains a characteristic round battery is also included.

Clear CMOS by jumper

CMOS may be cleared with a jumper on a substrate with labels such as "CLR_CMS" or "CLRMOS". Turn off the computer, remove the power cable, check the position of the jumper, remove the connector for 2-pin connectors, or change the position if the connector is a 3-pin connector. Normally, the motherboard notifies the options available to erase the BIOS as shown in the image below.

In the case of the latter, if the jumper is on the left and center pins, move to the center and right pin to launch the system. As a general method, the board itself has the same instructions, such as "1-2 Normal" and "2-3" Clear CMOS "" just above the jumper. If this does not apply to your case and there is not much clue on the board, please refer to the manufacturer's board manual. < SPAN> Access the battery and remove the battery using a driver or toothpick. You need to wait 20 to 30 minutes on a computer with the battery removed. After this time, return the battery, connect the cable and turn on the power. The BIOS should no longer request a password. Not only that, all set parameters return to the state of the factory.

Clear CMOS

This is nothing but reset the BIOS to the state at the time of shipment (be careful as all the configured contents are lost). To do this, recent motherboards already have a button called Clear CMOS, and some motherboards are on the back connector panel, so you don't have to open the tower and access the buttons as shown in the photo below. 。

Continue the system with the computer is off, pressed this button for 10 seconds (or the time listed in the motherboard manual) and launch the system. That's it. This is the same system as the previous one, but there is no need to open the computer and remove the battery. However, there is no risk of modifying the PC components that may be damaged on the way in a more controlled method. For example, a slot that contains a characteristic round battery is also included.

Clear CMOS by jumper

CMOS may be cleared with a jumper on a substrate with labels such as "CLR_CMS" or "CLRMOS". Turn off the computer, remove the power cable, check the position of the jumper, remove the connector for 2-pin connectors, or change the position if the connector is a 3-pin connector. Normally, the motherboard notifies the options available to erase the BIOS as shown in the image below.

In the case of the latter, if the jumper is on the left and center pins, move to the center and right pin to launch the system. As a general method, the board itself has the same instructions, such as "1-2 Normal" and "2-3" Clear CMOS "" just above the jumper. If this does not apply to your case and there is not much clue on the board, please refer to the manufacturer's board manual. Access the battery and remove the battery using a driver or toothpick. You need to wait 20 to 30 minutes on a computer with the battery removed. After this time, return the battery, connect the cable and turn on the power. The BIOS should no longer request a password. Not only that, all set parameters return to the state of the factory.

Clear CMOS

This is nothing but reset the BIOS to the state at the time of shipment (be careful as all the configured contents are lost). To do this, recent motherboards already have a button called Clear CMOS, and some motherboards are on the back connector panel, so you don't have to open the tower and access the buttons like the photo below. 。

Continue the system with the computer is off, pressed this button for 10 seconds (or the time listed in the motherboard manual) and launch the system. That's it. This is the same system as the previous one, but there is no need to open the computer and remove the battery. However, there is no risk of modifying the PC components that may be damaged on the way in a more controlled method. For example, a slot that contains a characteristic round battery is also included.

Clear CMOS by jumper

CMOS may be cleared with a jumper on a substrate with labels such as "CLR_CMS" or "CLRMOS". Turn off the computer, remove the power cable, check the position of the jumper, remove the connector for 2-pin connectors, or change the position if the connector is a 3-pin connector. Normally, the motherboard notifies the options available to erase the BIOS as shown in the image below.

In the case of the latter, if the jumper is on the left and center pins, move to the center and right pin to launch the system. As a general method, the board itself has the same instructions, such as "1-2 Normal" and "2-3" Clear CMOS "" just above the jumper. If this does not apply to your case and there is not much clue on the board, please refer to the manufacturer's board manual.

If you do not know how to clear CMOS, we have a CMOS clear procedure using a jumper. In any case, it is recommended if the CMOS battery is completely exhausted and cannot save data. In that case, it is recommended that you not only change it, but also turn off the PC and turn it on, confirm that the settings are stored in the BIOS, and that all are installed correctly. Masu.

Flash to unlock the BIOS password

The third method is to flash the BIOS, that is, update to the latest version. Because the update process itself may require a BIOS password, and if there is no password, it cannot be logically updated. This method reset the BIOS to the default at the time of the factory. In any case, depending on the model of the manufacturer or motherboard, there are cases where the BIOS password is protected, but it can flash without knowing it (and all the passwords are deleted). 。

Unfortunately, if you can't remember the BIOS password, there are no other options so far. Fortunately, as you can see, these methods are very simple. Just because you can't remember your password is not the end of this world. Of course, if there is no other way, replacing the motherboard is the easiest way to understand. In any case, when upgrading PC components, you should always do it. After all, it is clear that the motherboard is updated with new technology over time, and cannot be implemented with a simple firmware update.

Do I need a BIOS password?

Considering the options to r e-access the BIOS after forgetting the access password, consider in advance whether it is worth enabling such a thing. As we have mentioned so far, this kind of countermeasure is taken to prevent someone accessing a PC and eliminating or changing its contents. This is the key to theft because the thief can protect your personal information from the eyes of a third party unless you know how to do it. < SPAN> If you do not know how to clear CMOS, we have a CMOS clear procedure using a jumper. In any case, it is recommended if the CMOS battery is completely exhausted and cannot save data. In that case, it is recommended that you not only change it, but also turn off the PC and turn it on, confirm that the settings are stored in the BIOS, and that all are installed correctly. Masu.

Flash to unlock the BIOS password

The third method is to flash the BIOS, that is, update to the latest version. Because the update process itself may require a BIOS password, and if there is no password, it cannot be logically updated. This method reset the BIOS to the default at the time of the factory. In any case, depending on the model of the manufacturer or motherboard, there are cases where the BIOS password is protected, but it can flash without knowing it (and all the passwords are deleted). 。

Unfortunately, if you can't remember the BIOS password, there are no other options so far. Fortunately, as you can see, these methods are very simple. Just because you can't remember your password is not the end of this world. Of course, if there is no other way, replacing the motherboard is the easiest way to understand. In any case, when upgrading PC components, you should always do it. After all, it is clear that the motherboard is updated with new technology over time, and cannot be implemented with a simple firmware update.

Do I need a BIOS password?

Considering the options to r e-access the BIOS after forgetting the access password, consider in advance whether it is worth enabling such a thing. As we have mentioned so far, this kind of countermeasure is taken to prevent someone accessing a PC and eliminating or changing its contents. This is the key to theft because the thief can protect your personal information from the eyes of a third party unless you know how to do it. If you do not know how to clear CMOS, we have a CMOS clear procedure using a jumper. In any case, it is recommended if the CMOS battery is completely exhausted and cannot save data. In that case, it is recommended that you not only change it, but also turn off the PC and turn it on, confirm that the settings are stored in the BIOS, and that all are installed correctly. Masu.

Flash to unlock the BIOS password

The third method is to flash the BIOS, that is, update to the latest version. Because the update process itself may require a BIOS password, and if there is no password, it cannot be logically updated. This method reset the BIOS to the default at the time of the factory. In any case, depending on the model of the manufacturer or motherboard, there are cases where the BIOS password is protected, but it can flash without knowing it (and all the passwords are deleted). 。

Unfortunately, if you can't remember the BIOS password, there are no other options so far. Fortunately, as you can see, these methods are very simple. Just because you can't remember your password is not the end of this world. Of course, if there is no other way, replacing the motherboard is the easiest way to understand. In any case, when upgrading PC components, you should always do it. After all, it is clear that the motherboard is updated with new technology over time, and cannot be implemented with a simple firmware update.

Do I need a BIOS password?

Considering the options to r e-access the BIOS after forgetting the access password, consider in advance whether it is worth enabling such a thing. As we have mentioned so far, this kind of countermeasure is taken to prevent someone accessing a PC and eliminating or changing its contents. This is the key to theft because the thief can protect your personal information from the eyes of a third party unless you know how to do it.

In any case, always consider whether there are other equally effective alternatives to achieve the same goal, either through Windows or by increasing security within the user where all important information is stored. This BIOS password, a feature introduced long ago with the first computers, is not necessarily the most efficient, effective and secure way to protect all the information we handle on a daily basis, even in 2023. In such cases, a cloud solution with its own vault is more recommended.

So, keep that in mind before you put a password on your BIOS. And make the old (analog) decision to leave it written on a post-it note stuck on your PC tower so you don't forget. This is unusual, and don't think that your earlier decision to shield everything you store will be in vain. Especially since it can sometimes factory reset not only your password, but your entire BIOS settings.